Basic dimensions table
General information
The table contains basic data about the dimensions of the tanks to be produced by Spomasz Zamość S.A. Dimensions modifications are possible. The capacity is calculated for the up-right tanks to be leg-placed with the cone-bottom at the ankle of 15 degrees.
| Tank | Capacity | Dimensions | |||
|---|---|---|---|---|---|
| Tank diameter fd | Tank coat height h | Total tank height H | hp | ||
| [m³] | [m] | [m] | [m] | [m] | |
| Z05-079 | 0,5 | 0,79 | 1,0 | 1,6 | 0,4 |
| Z1-093 | 1 | 0,93 | 1,5 | 2,2 | |
| Z2-127 | 2 | 1,27 | 1,5 | 2,3 | |
| Z3-138 | 3 | 1,38 | 2,0 | 2,8 | |
| Z4-159 | 4 | 1,59 | 2,0 | 2,8 | |
| Z5-175 | 5 | 1,75 | 2,0 | 3,0 | |
| Z6-159 | 6 | 1,59 | 3,0 | 3,8 | |
| Z6-174 | 1,74 | 2,5 | 3,4 | ||
| Z6-191 | 1,91 | 2,0 | 2,9 | ||
| Z7-172 | 7 | 1,72 | 3,0 | 3,9 | |
| Z7-188 | 1,88 | 2,5 | 3,4 | ||
| Z7-211 | 2,11 | 2,0 | 3,0 | ||
| Z8-170 | 8 | 1,70 | 3,5 | 4,4 | |
| Z8-184 | 1,84 | 3,0 | 3,9 | ||
| Z8-200 | 2,00 | 2,5 | 3,5 | ||
| Z10-180 | 10 | 1,8 | 4,0 | 5,0 | 0,5 |
| Z10-190 | 1,90 | 3,5 | 4,4 | ||
| Z10-205 | 2,05 | 3,0 | 4,2 | ||
| Z10-225 | 2,25 | 2,5 | 3,6 | ||
| Z12-188 | 12,5 | 1,88 | 4,5 | 5,5 | |
| Z12-199 | 1,99 | 4,0 | 5,0 | ||
| Z12-210 | 2,10 | 3,5 | 4,6 | ||
| Z12-230 | 2,30 | 3,0 | 4,1 | ||
| Z15-205 | 15 | 2,05 | 4,5 | 5,5 | |
| Z15-220 | 2,20 | 4,0 | 5,1 | ||
| Z15-233 | 2,33 | 3,5 | 4,6 | ||
| Z15-250 | 2,50 | 3,0 | 4,2 | ||
| Z20-237 | 20 | 2,37 | 4,5 | 5,6 | |
| Z20-250 | 2,50 | 4,0 | 5,2 | ||
| Z20-270 | 2,70 | 3,5 | 4,2 | ||
| Z20-286 | 2,86 | 3,0 | 4,2 | ||
| Z25-240 | 25 | 2,40 | 5,5 | 6,6 | |
| Z25-252 | 2,52 | 5,0 | 6,2 | ||
| Z25-263 | 2,63 | 4,5 | 5,8 | ||
| Z25-282 | 2,82 | 4,0 | 5,2 | ||
| Z25-301 | 3,01 | 3,5 | 4,8 | ||
| Z30-251 | 30 | 2,51 | 6,0 | 7,2 | |
| Z30-263 | 2,63 | 5,5 | 6,7 | ||
| Z30-275 | 2,75 | 5,0 | 6,2 | ||
| Z30-286 | 2,86 | 4,5 | 6,0 | ||
| Z30-310 | 3,10 | 4,0 | 5,3 | ||
| Z40-269 | 40 | 2,69 | 7,0 | 8,2 | |
| Z40-279 | 2,79 | 6,5 | 7,7 | ||
| Z40-290 | 2,90 | 6,0 | 7,2 | ||
| Z40-304 | 3,04 | 5,5 | 6,8 | ||
| Z40-315 | 3,15 | 5,0 | 6,5 | ||
| Z50-310 | 50 | 3,10 | 6,5 | 7,8 | |
| Z50-325 | 3,25 | 6,0 | 7,3 | ||
| Z60-327 | 60 | 3,27 | 7,0 | 8,4 | |
| Z75-350 | 70 | 3,50 | 7,5 | 9,9 | |